Short- and Long-Term Binder Aging Methods to Accurately Reflect Aging in Asphalt Mixtures

Asphalt binder experiences aging during mixture production and the service life of the pavement. Aging of asphalt binder directly influences the stiffness and damage resistance of asphalt mixtures. The current industry practice is to simulate short-term and long-term aging in asphalt binders using the rolling thin-film oven American Association of State Highway and Transportation Officials (AASHTO T 240) and pressure aging vessel (AASHTO R 28), respectively. These methods and the parameters (e.g., aging temperature, pressure, and duration) involved in their use were developed a few decades ago for neat binders produced from conventional crude oil sources; they were adopted as standards primarily to aid performance grading of asphalt binders. Over the last few years, there have been several significant changes in asphalt technology. The use of warm mix asphalt and reclaimed asphalt pavements has significantly increased. The use of additives and chemical and polymer modifiers to enhance binder properties has also greatly increased; in some cases, the oxidation kinetics of such modified binders are significantly different from that of conventional binders. Stiffer binder grades may experience insufficient oxidation in the laboratory aging process. Finally, studies have confirmed that a better understanding of binder aging and oxidation can improve our ability to predict damage in asphalt pavements. In light of the above changes in asphalt technology, research is needed to develop new or improved short- and long-term binder aging methods to accurately reflect the aging in asphalt mixtures not currently captured by AASHTO T 240 and R 28. The objective of this research is to develop practical laboratory aging methods to accurately simulate the short-term (from production to placement) and long-term (in-service) aging of asphalt binders. The research shall determine the relationship between different methods of laboratory aging of asphalt binders and the actual aging that occurs during mixture production, transport, and placement as well as during the service life of the pavement structure.


  • English


  • Status: Active
  • Contract Numbers:

    Project 09-61

  • Sponsor Organizations:

    National Cooperative Highway Research Program

    Transportation Research Board
    500 Fifth Street, NW
    Washington, DC  United States  20001

    American Association of State Highway and Transportation Officials (AASHTO)

    444 North Capitol Street, NW
    Washington, DC  United States  20001

    Federal Highway Administration

    1200 New Jersey Avenue, SE
    Washington, DC  United States  20590
  • Project Managers:

    Harrigan, Edward

  • Performing Organizations:

    Advanced Asphalt Technologies, LLC

    108 Powers Court, Suite 100
    Sterling, VA  United States  20166-9321
  • Principal Investigators:

    Bonaquist, Ramon

  • Start Date: 20170305
  • Expected Completion Date: 0
  • Actual Completion Date: 0
  • Source Data: RiP Project 41491

Subject/Index Terms

Filing Info

  • Accession Number: 01628074
  • Record Type: Research project
  • Source Agency: Transportation Research Board
  • Contract Numbers: Project 09-61
  • Files: TRB, RiP
  • Created Date: Mar 5 2017 1:00AM