Technical Assistance to NCHRP and NCHRP Project 1-40A: Version 0.9 AND 1.0 of the M-E Pavement Design Software
At the request of the AASHTO Joint Task Force on Pavements (JTFP), NCHRP initiated Project 1-37A in 1996 to develop a guide for the design of new and rehabilitated pavement structures. In contrast to the current AASHTO Guide for Design of Pavement Structures, the guide recommended in 2004 by the Project 1-37A research team is based on mechanistic-empirical (M-E) principles; provides a uniform basis for the design of flexible, rigid, and composite pavements; and employs common design parameters for traffic, subgrade, environment, and reliability. Many pavement designers at state departments of transportation (DOT) may not be familiar with the concepts incorporated in the recommended M-E pavement design guide. Also, the recommended guide incorporates numerous relationships between traffic loading, climatic conditions, material characteristics, and distress modes and ranges that have been verified with field data from different parts of the United States, and thus represents a nationally-valid analysis approach; these relationships could be refined to better reflect regional and local conditions, materials, and practices. A key component of the JTFP's plan for implementation and adoption of the recommended M-E pavement design guide and software is an independent, third-party review to test the design guide's underlying assumptions, evaluate its engineering reasonableness and design reliability, and identify opportunities for its implementation in day-to-day design production work. Beyond this immediate requirement, there is a need for a coordinated effort to acquaint state DOT pavement designers with the principles and concepts employed in the recommended guide, assist them with the interpretation and use of the guide and its software and technical documentation, develop step-by-step procedures to help state DOT engineers calibrate distress models on the basis of local and regional conditions for use in the recommended guide, and perform other activities to facilitate its acceptance and adoption. The objectives of this project are to (1) work in coordination with the contractor for Project 1-40D(02) to produce improved, corrected version 0.9 of the M-E Pavement Design Guide software and (2) provide ongoing troubleshooting support for NCHRP and FHWA.
Language
- English
Project
- Status: Completed
- Funding: $642819.00
-
Contract Numbers:
Project 1-40D(01)
-
Sponsor Organizations:
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC United States 20590American Association of State Highway and Transportation Officials (AASHTO)
444 North Capitol Street, NW
Washington, DC United States 20001National Cooperative Highway Research Program
Transportation Research Board
500 Fifth Street, NW
Washington, DC United States 20001 -
Project Managers:
Harrigan, Edward
-
Performing Organizations:
Arizona State University, Phoenix
Evaluation Research Team
Phoenix, AZ United States 85069 -
Principal Investigators:
Witczak, Matthew
- Start Date: 20050718
- Expected Completion Date: 0
- Actual Completion Date: 20091231
- Source Data: RiP Project 11809
Subject/Index Terms
- TRT Terms: Climate; Pavement design; Pavement distress; Pavements; Research projects; Software; State departments of transportation; Traffic loads
- Identifier Terms: National Cooperative Highway Research Program
- Subject Areas: Data and Information Technology; Design; Highways; Pavements;
Filing Info
- Accession Number: 01462941
- Record Type: Research project
- Source Agency: National Cooperative Highway Research Program
- Contract Numbers: Project 1-40D(01)
- Files: RiP, USDOT
- Created Date: Jan 3 2013 2:13PM